Inside-The-Faceplate Features - Extron electronics FOX T UWP 302 User Manual

Inside-the-Faceplate Features

A
B
C
Figure 5.
A
Link 1 and Link 2 LED indicators — Light when there is light present on the
corresponding fiber optic port.
B
Reset button — Press the Reset button to return device settings or firmware to the
factory default settings (see
C
Config port — Connect a host device, such as a PC, to the USB mini-B configuration
port for RS-232 protocol control of all FOX T UWP 302 functions. Configure the
FOX T UWP 302 with SIS commands (see
page 15) or the FOX Extenders control program (see
Program
AUDIO INPUT
COMPUTER INPUT
POWER
PC
HDMI
HDCP
RESET
AUDIO
CONFIG
FOX T UWP 302 Under-the-Faceplate Features
System Reset
on page 23).
FOX T UWP 302 Wallplate Transmitter • Installation and Operation
HDMI INPUT
on page 14).
SIS Configuration and Control
FOX Extenders Control
on
9