Table of Contents
Advertisement
Update Firmware
The
option opens the Extron Firmware Loader application. This
Update Firmware
application is used to upload new firmware to the connected device (see
FIrmware
on page 43 to download new firmware).
NOTE: In order for the
Update Firmware
application (see
Downloading Extron Firmware Loader
option is disabled.
Update Firmware
To update firmware:
1.
From the
menu, select
Tools
the menu bar. This opens Firmware Loader (if this application is already installed on the
connected PC).
Figure 18.
Firmware Loader Interface
2.
Upload new firmware (see
If necessary, download new firmware from the Extron website (see
Firmware
on page 43).
3.
Exit Firmware Loader.
4.
From the
menu of the FOX Extenders Control Program, select
File
re-establish communication with the device.
5.
Re-enter the connection information in the Connect dialog box to re-establish
communication with the device.
See the Firmware Loader Help File and supporting documentation for further information
about using Firmware Loader.
Refresh
The
option refreshes the main screen of the FOX Extenders Control Program
Refresh
without restarting the application. This is useful if connection to a device is lost (such as if
the unit has been unplugged accidentally) or settings change on the device.
From the
menu, select
Tools
FOX T UWP 302 Wallplate Transmitter • FOX Extenders Control Program
option to work, install the Firmware Loader
. Alternatively, click the
Update Firmware
Installing Firmware with Firmware Loader
. Alternatively, click the
Refresh
Downloading
on page 41). Otherwise, the
icon below
on page 44).
Downloading
to
Connect
icon.
29
Advertisement
Table of Contents
