Installing A 4X 2.5-Inch Nvme Pcie Ssd Upgrade Kit - Lenovo System x3650 M5 Installation And Service Manual

Figure 289. Cable connections
Step 10. If you removed the fan cage assembly, install it. (See "Replacing the fan cage assembly" on
page 179).
Step 11. Insert the hard disk drives and the fillers the rest of the way into the bays.
Step 12. Install the top cover (see "Replacing the top cover" on page 151).
Step 13. Slide the server into the rack.
Step 14. Reconnect the power cords and any cables that you removed.
Step 15. Turn on the peripheral devices and the server.

Installing a 4x 2.5-inch NVMe PCIe SSD upgrade kit

Use this information to install a 4x 2.5-inch NVMe PCIe SSD upgrade kit.
To order a 4x 2.5-inch NVMe PCIe SSD upgrade kit, contact your sales representative or reseller.
The 4x 2.5-inch NVMe PCIe SSD upgrade kit contains the following components:
• Four signal cables
• One power/configuration cable
• One backplane assembly
To support the NVMe PCIe SSD upgrade kit, your server must meet the following requirements:
• For eight 2.5-inch-drive or sixteen 2.5-inch-drive models with one microprocessor installed, one upgrade
kit is supported.
PCI riser card type in riser-card assembly 1
Type 1
PCI riser-card assembly
Type 2
PCI riser-card assembly
Type 3
316
Lenovo System x3650 M5 Installation and Service Guide
PCI riser card type in riser-card assembly 2
Slot 1, PCIe x8
Not supported
Slot 2, PCIe x8
Slot 3, PCIe x8
Slot 1, PCIe x8
Not supported
Slot 2, PCIe x8
Slot 3, ML2
Not supported
NVMe
adapter
installation
sequence
PCI slot 1, 2
PCI slot 1, 2
PCI slot 3, 4