Cable cover
Figure 171. Cable cover removal
8. Grasp the EIA assembly and pull it slightly to remove it from the server.
Figure 172. EIA assembly removal
9. If you are instructed to return the EIA assembly, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Replacing an EIA assembly
Use the following instructions to replace an EIA assembly for 2.5-inch and 3.5-inch models.
Note: The EIA assembly is available only on some models.
2.5-inch model
There are the right EIA assembly and the left EIA assembly on the server, use the following steps to replace
them.
EIA assembly
Chapter 5
.
Installing, removing, and replacing components
223