Installing The Driver For The Sata Ahci; Installing The Driver For The Fusionio Pcie Ssd-Ioscale3 - Lenovo ThinkServer RD650 Operating System Installation Manual

1. Download the driver for the ThinkServer Trusted Platform Module (TPM) from the Lenovo Web site. If the
driver is a compressed file, unzip it to a folder. The most up-to-date device drivers for various server
models are always available for download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Open the folder that contains the driver and double-click the Setup file.
4. In the Choose Setup Language window, select English (United States), and then click OK.
5. When the Setup status window opens, the driver installation begins.
6. When the InstallShield Wizard Complete window opens, click Finish. The installation is completed.

Installing the driver for the SATA AHCI

To install the driver for the SATA AHCI, do the following:
1. Download the driver for the SATA AHCI from the Lenovo Web site. If the driver is a compressed file,
unzip it to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Open the Device Manager window. Under the IDE ATA/ATAPI controller, right-click on the SATA AHCI
Controller that requires drivers, and then select Update Driver Software....
4. In the Update Driver Software window, click Browse my computer for driver software.
5. In the Browse for driver software on your computer window, click Browse... to locate the driver you
want to install.
6. Click OK ➙ Next.
Note: If the Windows Security dialogue box is displayed, select the option to trust the software and
then click Install.
7. When the message "Windows has successfully updated your driver software" is displayed, click Close.
8. When the message "System Settings Change" is displayed, click Yes. Your server restarts
automatically.

Installing the driver for the FusionIO PCIe SSD-IOScale3

Note: This topic applies only to the Lenovo ThinkServer RD650 servers.
To install the driver for the FusionIO PCIe SSD-IOScale3, do the following:
1. Download the corresponding driver from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage device
to your server.
3. Open the folder that contains the driver and double-click the Setup file.
4. In the Fusion ioMemory VSL4 setup window, select I agree to the license terms and conditions, and
then click Install.
5. In the Setup Successful window, select Close.
.
Chapter 4 Installing drivers
103