Removing A Riser-Card Assembly - Lenovo System x3650 M5 Installation And Service Manual

Figure 117. Cable routing
Step 7. Replace the top cover (see "Replacing the top cover" on page 151).
Step 8. Slide the server into the rack.
Step 9. Reconnect the power cords and any cables that you removed.
Step 10. Turn on the peripheral devices and the server.

Removing a riser-card assembly

Use this information to remove a riser-card assembly.
See http://www.lenovo.com/ serverproven/ for a list of riser-card assemblies that you can use with the server.
To remove a riser-card assembly, complete the following steps:
Step 1. Read the safety information that begins on page "Safety" on page v and "Installation guidelines" on
page 297.
Step 2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
Step 3. Remove the top cover (see "Removing the top cover" on page 149).
186
Lenovo System x3650 M5 Installation and Service Guide
DVD drive cable Operator information /
LCD panel cable
Front USB cable