Removing An Optional Serveraid Adapter Memory Module - Lenovo System x3650 M5 Installation And Service Manual

2
Figure 237. Security bezel installation
Step 4. Use the key to lock the bezel if required.

Removing an optional ServeRAID adapter memory module

Use this information to remove an optional ServeRAID adapter memory module.
To remove an optional ServeRAID adapter memory module, complete the following steps.
Step 1. Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 297.
Step 2. Turn off the server, and disconnect all power cords and external cables.
Step 3. Remove the top cover (see "Removing the top cover" on page 149).
Step 4. Locate the ServeRAID adapter with the ServeRAID adapter memory module installed. Then remove
any parts and disconnect any cables that might impede your access to the ServeRAID adapter
memory module.
Step 5. Pivot the retaining clips outward. Then grasp the ServeRAID adapter memory module by its edges
and carefully pull it straight up to remove it from the memory module slot on the ServeRAID adapter.
Figure 238. ServeRAID adapter memory module removal
Step 6. If you are instructed to return the ServeRAID adapter memory module, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.
274
Lenovo System x3650 M5 Installation and Service Guide
Security bezel
1