• Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the replacement coin-cell battery, complete the following steps:
Step 1.
Follow any special handling and installation instructions that come with the replacement battery.
Step 2.
Read the safety information that begins on "Safety" on page v and "Installation guidelines" on
page 297.
Step 3.
Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 4.
Remove the top cover (see "Removing the top cover" on page 149).
Step 5.
If necessary, lift the riser-card assembly 2 out of the way (see "Removing a riser-card assembly" on
page 186).
Step 6.
Insert the new battery:
Figure 212. Coin-cell battery position
a.
Tilt the battery so that you can insert it into the socket on the side opposite the battery clip.
258
Lenovo System x3650 M5 Installation and Service Guide
Battery