Vr2 Machine Specifications - CYBEX VR2 Owner's And Service Manual

VR2 Machine Specifications

Seated Leg Press - Product No. 4605
Machine Weight
1016 lbs.
462 kg
• Four-bar linkage enhances alignment and provides variable resistance.
• Counter-balanced footplate effortlessly adjusts for desired starting position.
• Back pad adjusts to five positions for exercise variation.
• Sliding 5-LB increment weights allow the user to fine-tune resistance levels.
Leg Extension - Product No. 4613, 4612, 4611
Machine Weight
594 lbs.
270 kg
• Seat back and tibia pad adjusts without affecting knee alignment or start
position angle.
• Advanced RLD design maintains integrity of the resistance profile.
• RLD positions are 10
protection.
Prone Leg Curl - Product No. 4618, 4617, 4616
Machine Weight
484 lbs.
220 kg
• Incorporation of elbow pads and handles is more sanitary and encourages a
neutral spine.
• Advanced RLD design maintains integrity of the resistance profile.
• RLD positions are 10
protection.
Seated Leg Curl - Product No. 4628, 4627, 4626
Machine Weight
507 lbs.
230 kg
• Seat back and tibia pad adjusts without affecting knee alignment of start
position angle.
• Advanced RLD design maintains integrity of the resistance profile.
• RLD positions are 10
protection.
Technical
Specifications
Page 1-4
Cybex VR2 Owner's Manual
Weight Stack
505 lbs. inches = 43 W x 89 L x 71 H
229 kg cm = 110 W x 226 L x 181 H
Weight Stack
305 lbs. inches = 39 W x 50 L x 61 H
139 kg cm = 99 W x 127 L x 155 H
o
apart with start and end phased by 5
Weight Stack
205 lbs. inches = 37 W x 80 L x 61 H
93 kg cm = 94 W x 204 L x 155 H
o
apart with start and end phased by 5
Weight Stack
205 lbs. inches = 39 W x 70 L x 61 H
93 kg cm = 99 W x 178 L x 155 H
o
apart with start and end phased by 5
Size
Size
o
for maximum
Size
o
for maximum
Size
o
for maximum
width