Event Scheduling - Christie DWU1052 User Manual

8. Other Functions

8.3 Event Scheduling

The scheduling function sets up scheduled events including power on / power off.
It enables the projector to be self-management.
Note the following before setting the schedule.
NOTE
• Schedule can also be set in OPTION - SCHEDULE menu of the
projector. (&Refer to Operating Guide – OPTION).
• A maximum of 16 programs of schedule can be set. A maximum of 20 events
can be registered in one program.
• No events are registered in program 1 – 16 with factory default settings. The
program is required to be set in advance when using the schedule function for
the first time.
• The priority for scheduled events is as follows 1) specific date 2) weekly
• Up to 10 specific dates are available for scheduled events. Priority is given to
those with the lower numbers when more than one event has been scheduled
for the same date and time for example, 'Specific date No. 1' has priority over
'Specific date No. 2' and so on.
• The power on event has the lowest priority among all the events set at the
same time.
• Set the date and time before enabling scheduled events. (&56)
• After the projector is moved, check the date and time set for the projector
before configuring the schedules.
• The internal clock's time may not remain accurate. Using SNTP is recommended
to maintain accurate time.
• Certain error states in the projector (such as temperature error, lamp error)
prevent the projector from appropriate execution of scheduled functions/events.
• Events My Image and Messenger are not executed appropriately and result
in schedule execution error status when the lamp does not light and/or data to
be displayed are not stored in the projector at the time when scheduled event is
executed.
• Events Input Source and My Image are not executed if the security function
is enabled and the projector is locked due to the function.
DWU1052/DHD1052
User's Manual - Network Guide
94
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET