Christie DWU1052 User Manual page 22

Item
PROJECTOR
NAME
(continued on next page)
DWU1052/DHD1052
User's Manual - Network Guide
Any name can be set to the projector to identify it on the
network.
(1) Select the PROJECTOR
NAME and press the ►
button. The PROJECTOR
NAME dialog is displayed.
Use the displayed software keyboard to enter the
PROJECTOR NAME.
DELETE : Deletes one character.
CLEAR ALL: Deletes all characters.
CANCEL : Returns to the network menu after discarding
the entered characters.
OK : Returns to network menu after saving the entered
characters.
(2) The current PROJECTOR NAME is displayed on the first
three lines. The projector name is pre-assigned by default.
Use the ENTER or INPUT button to select and enter
characters.
To erase one character at one time, press the RESET
button or press the ◄ and INPUT button at the same
time. If you move the cursor to DELETE or CLEAR ALL
on screen and push the ENTER or INPUT button, one
character or all characters are erased. Up to 64 characters
can be entered for the PROJECTOR NAME.
(3) To change an already inserted
character, move the cursor
to one of the first three lines,
and move the cursor on the
character to be changed.
After pressing the ENTER or
INPUT button, the character is
selected. Then, follow the same
procedure as described at the
item (2) above.
(4) To finish entering text, move the cursor to the OK on
screen and press the ►, ENTER or INPUT button. To
revert to the previous PROJECTOR NAME without saving
changes, move the cursor to the CANCEL on screen and
press the ◄, ENTER or INPUT button.
2. Connection to the network
Description
21
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET