Christie DWU1052 User Manual page 43

3. Web Control
3.1 Projector Web Control - Network Settings (continued)
Item
Common Setup
(continued)
Crestron
Extron
Wireless Setup
Mode
Encryption Lock
(continued on next page)
DWU1052/DHD1052
User's Manual - Network Guide
Configures the settings common to wireless and wired LAN.
Configures the Crestron setting to detect the projector from
the controllers of Crestron connected to the same network.
For the details of Crestron, visit the Crestron web site.
URL: http://www.crestron.com
Configures the Extron setting to detect the projector from the
controllers of Extron connected to the same network using
TM
HDBaseT port. For the details of Extron, visit the Extron
web site.
URL: http://www.extron.com
• This item is enabled only when HDBaseT
NOTE
is selected in WIRED NETWORK. (&34)
Configures the wireless LAN settings.
Select Simple Access Point or Infrastructure.
NOTE
• When switching MODE, it takes 60
seconds to use wireless LAN. In the meantime, the
operating speed of the projector may be decreased
and NETWORK INFORMATION may not be
displayed correctly.
Permits or inhibits changes of the following settings related to
wireless connection.
･ Mode
･ SSID
･ SSID Broadcast
･ Encryption
･ Encryption key (WEP key, WPA passphrase)
When Encryption Lock is set to ON, these settings cannot be
changed by the menu of the projector.
NOTE
• If Encryption Lock is ON, wireless
connection is performed only when it can be
connected without changing the current settings.
42
Description
LIT MAN USR DWU/DHD1052 NET
020-000855-01 Rev.1 (12-2015)