Christie DWU1052 User Manual page 39

3. Web Control
NOTE
• Crestron e-Control
®
Flash Player on your computer to use Crestron e-Control
is not displayed in a web browser that does not support Flash
• The selection window does not appear but the Login window of the Projector
Web Control is displayed for the following:
- Network Settings - Other Setup - Crestron e-Control is Disable (&45)
- Network Settings - Common Setup - Crestron is OFF (&42)
- NETWORK menu - Third Party Control - CRESTRON is OFF (&34)
Refer to the following for configuring or controlling the projector using a web
browser.
Make sure that your computer and the projector is connected using network, and
then start Web browser.
Enter the projector's IP address into URL input box of the Web browser as the
example below, and then press the Enter key or
Example: If the IP address of the projector is set to 192.168.1.10:
Enter "http://192.168.1.10/" into the address bar of the web browser
and press the Enter key or
click
If a correct URL is input, and the
projector and your computer are
connected to the same network
correctly, the selection window is
displayed.
NOTE
• Do not control the projector with the projector's menu or remote
control, and the Web Control at the same time. It may cause some operational
errors in the projector.
• The language used on the Projector Web Control is the same as that of the
OSD on the projector. If you want to change it, you must change the OSD
language on the projector. (&MENU PREFERENCES in the Operating Guide)
DWU1052/DHD1052
User's Manual - Network Guide
®
is created using Flash
button.
. You must install Adobe
®
button.
38
®
. Crestron e-Control
®
.
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET
®
®