Christie DWU1052 User Manual page 96

8. Other Functions
The following procedure sets the schedule in Projector Web Control.
Setting the program is necessary to use the schedule function. Various events
such as power on/off or switching input source, and the time to execute the events
must be registered in the program. No events are registered in program 1 – 16
with factory default settings. Set the program following the steps below.
In the case that the program has already been set, skip to step 6).
1) Select [Schedule Settings] on main menu in Projector Web Control.
2) Select the program number in list under Program List and click the [Program
Edit] button to display the following program edit display. The display for editing
Program-1 is shown below.
3) After setting the time, events and parameters, click the [Register] to add the
new event.
Click the [Delete] button to delete an event.
Click the [Delete All] button to delete all the events in the currently selected
program.
DWU1052/DHD1052 020-000855-01 Rev.1 (12-2015)
95
User's Manual - Network Guide LIT MAN USR DWU/DHD1052 NET