2. Connection to the network
2.2
Connection using wired LAN
The connection using wired LAN is available. Set wired LAN for the projector by
following the instructions of your network administrator when connecting to the
existing network.
2.3
Connection setup of Wired LAN
1) Connect the projector to the computer using a hub
with a LAN cable (CAT-5e or higher).
2) Press the MENU button on the remote control or the
control panel of the projector.
The MENU you last used appears.
Use the cursor button to select the following.
EASY MENU > ADVANCED MENU > NETWORK > WIRED SETUP
3) Set the following items in WIRED SETUP.
・ DHCP
・ IP ADDRESS
・ SUBNET MASK
・ DEFAULT GATEWAY
・ DNS SERVER
For setting an IP address, refer to About IP address. (&13)
Select APPLY, then press the ENTER button to apply the settings.
DWU1052/DHD1052
User's Manual - Network Guide
12
hub
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET