Christie DWU1052 User Manual page 91

8. Other Functions
NOTE
• The timing of receiving Filter Error email is depending on the FILTER
MESSAGE setting in the LAMP & FILTER item of the SETUP menu which
determines the period until the filter message is displayed on the projector
screen. An email is sent when the usage time of the filter exceeds the set time
limit. No notification email is sent if the FILTER MESSAGE is set to TURN OFF.
(&SETUP menu in the Operating Guide)
• Lamp Time Alarm is a threshold for email notification of the lamp time. When
the set time exceeds the limit configured in the Projector Web Control, an email
is sent. Lamp Time Alarm can be enabled for both or either one of lamp-1 and
lamp-2.
• Filter Time Alarm is a threshold for email notification of the filter time. When
the set time exceeds the limit configured in the Projector Web Control, an email
is sent.
• Filter Status Notification can be enabled for both or either one of Status 1
and 2. These notifications are equivalent to changing the FILTER indicator on
the projector. (Status 1: off to orange, Status 2: orange to red) Refer to the
Operating Guide for details of the FILTER indicator.
• Lamp Error email is sent as follows:
-When both lamps are in failure, "Lamp Error" is sent.
-When either one of lamps is in failure,"Lamp-1 Warning" or "Lamp-2 Warning"
is sent according to the failed lamp.
DWU1052/DHD1052
User's Manual - Network Guide
90
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET