Christie DWU1052 User Manual page 70

3.2 Crestron e-Control
NOTE
• Crestron e-Control
following cases:
- Network Settings–Other Setup - Crestron e-Control is Disable (&45)
- Network Settings—Common Setup - Crestron is OFF (&42)
- NETWORK menu—Third Party Control - CRESTRON is OFF (&34)
Set Crestron to on and enable Crestron e-Control, then close the web browser.
Next, restart the web browser, followed by entering the projector's IP address.
• Only English is supported on Crestron e-Control
• If the connection is terminated, the Loading screen appears. Check the
connection between the projector and the computer, then return or refresh the
Web page.
• The control from Crestron e-Control
DWU1052/DHD1052
User's Manual - Network Guide
®
(continued)
cannot be used to operate projector in the
®
® is only supported using wired LAN.
69
3. Web Control
®
.
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET