3.1 Projector Web Control - Alert Settings (continued)
The Alert Items are shown below.
Item
Alarm Time
SNMP Trap
Send Mail
Mail Subject
Message
Click the [Apply] button to save the settings.
The settings are initialized when clicking the [Reset] button.
DWU1052/DHD1052
User's Manual - Network Guide
Configures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
Click the [Enable] checkbox to enable SNMP Trap
alerts.
Click the [Enable] checkbox to enable email alerts.
(Except Cold Start and Authentication Failure.)
Configures the subject line of the email to be sent.
The length of the subject line can be up to 100
alphanumeric characters. Using any other character
may shorten the subject line.
(Except Cold Start and Authentication Failure.)
Configures the message of the email to be sent.
The length of the message is up to 1024 alphanumeric
characters.
Using any other character may shorten the message.
(Except Cold Start and Authentication Failure.)
51
Description
LIT MAN USR DWU/DHD1052 NET
3. Web Control
020-000855-01 Rev.1 (12-2015)