Christie DWU1052 User Manual page 111

9. Troubleshooting
Item to be checked
Is the program to be executed
set correctly?
Are there any events set at the
same time?
* The schedule function may not operate correctly depending on the status of the
projector.
Issue: The time settings are not correct.
Item to be checked
Is battery set?
Is the date and time set correctly? Check the settings of Date/Time Settings menu
Is the projector connected to the
network correctly when getting
the time using the network?
Is SNTP server set correctly
when getting the time using the
network?
Is the time difference set correctly
when getting the time using the
network?
DWU1052/DHD1052
User's Manual - Network Guide
Solutions
Check the settings of Schedule Settings of the
Projector Web Control.
Some events cannot be executed at the same
time.
Set the events to be executed at the different
time or change the order.
Solutions
Set the battery.
The battery is considered to be exhausted if
the time is off soon after setting date and time.
In that case, replace the battery.
of the Projector Web Control or DATE AND
TIME menu of the projector.
Connect to the network.
Check the settings of SNTP server.
Consult with your network administrator
regarding the settings of SNTP server.
When getting the time using the network,
the correct time is not displayed if the time
difference is not set.
Set the time difference.
110
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET