Christie DWU1052 User Manual page 99

8. Other Functions
8.4 Command Control using the Network (continued)
When the authentication setting is enabled, the following settings are required.
(&58)
7) Click the [Security Settings] on the main menu.
8) Click the [Network Control] and enter the required authentication password.
* See NOTE.
9) Click the [Apply] button to save the settings.
NOTE
• The Authentication Password is the same for Network Control Port1
(Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port: 4352),
My Image Port (Port: 9716) and Messenger Port (Port: 9719).
• The new configuration settings are activated after restarting the network
connection. When the configuration settings are changed, you must restart
the network connection. You can restart the network connection from Network
Restart on the main menu. (&66)
DWU1052/DHD1052
User's Manual - Network Guide
98
020-000855-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 NET