Table of Contents
Advertisement
Working with the
scheduler
Use the scheduler to schedule automated events that play automatically on a specific date at a specific
time.
Scheduling automation
Schedule automation to run automatically on a specific date and time.
On CineLife+ projectors, the scheduler is enabled by default.
1. In the left navigation menu, select Scheduler.
2. To enable scheduled events, select the Scheduler is off slider.
The color of the slider changes to green to indicate it is active.
3. To select a date for the scheduled event, select Calendar.
4. Select the week.
5. Select a square below the date and next to the time you want the event to run.
6. Select + New Event.
7. Select Automation.
8. Select an automation item.
9. Select the start time.
10. Select the start date.
11. To repeat the event daily, weekly, or monthly:
a) Select the Recurrence slider.
b) Select the frequency of the recurrence.
The options are daily, weekly, or monthly.
c) Select the days or months you want the playlist, content, or automation event to play.
d) To select an end date for the schedule, select Calendar.
12. To prevent the scheduled event from being overwritten, select the Lock Event slider.
Locked events cannot be overwritten by pasted events.
13. Select Create Event.
CineLife+ User Guide
020-103073-10 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
91
Advertisement
Table of Contents
