Settings To Receive Fax - Ricoh GELSPRINTER GX 3000SF User Manual

3. Specifying and Adjusting the Machine's Operational Settings

Settings to Receive Fax

This section describes the reception settings in RX Settings.
RX Print Timer
You can specify whether to set the timer that lets the machine automatically enable and disable
"Memory RX" at specified times, and whether to password-protect files stored in memory.
On
Password
Enter a password using up to 4 numbers.
3
Start Time=
00:00 to 23:59
End Time=
00:00 to 23:59
Off
The default setting is "Off".
Number of Rings
You can specify how many times (1 to 16) the machine rings when it receives data.
The default setting is "2".
Auto Reduce RX
If the file the machine receives a file that is too large to print, you can specify whether to reduce
its size or trim it so that it can be printed.
On
Off
Cut
The default setting is "On".
RX Type
You can specify whether to print a multi-page file as it is being received or after the whole file is
received.
Memory RX
Prints a multi-page file after the whole file is received.
Immed. RX
Prints a multi-page file as it is being received.
The default setting is "Memory RX".
144