Internet Fax Function Error Messages: Control Panel - Ricoh GELSPRINTER GX 3000SF User Manual

*Comm. Error*
The connection with the server was lost while sending or receiving data.
A network error has occurred. Contact the administrator.
*No Poll RX File*
This message appears if you try to carry out polling reception but there is no file to be sent
by polling transmission at the other end. The machine prints a journal that contains the fax
communication logs.
*No Transfer Func.*
This message appears if you send a transfer request and the machine that receives it cannot
perform broadcast transmission. The machine prints a journal that contains the fax communi-
cation logs.
*Incorrect ID No.*
This message appears if you try to retrieve by polling reception a file for which a transfer
request or SUB code has been specified by the sender but it not specified on your machine.
The machine prints a journal that contains the fax communication logs.
*SUB or SID Error*
This message appears if you try to use a SUB code to send a file by immediate transmission
but the selected code is not specified in the machine on the other end. The machine prints a
journal that contains the fax communication logs.

Internet Fax Function Error Messages: Control Panel

This section gives likely causes, along with and possible solutions, of the main errors indicated on
the machine's control panel when using the Internet Fax.
System Error (XXXX)
A mechanical error has occurred. Switch the machine off and then back on. If the message
reappears, contact your sales or service representative. After the error is resolved, the
machine prints a journal that contains the fax communication logs.
*Cannot Connect to*
The machine is unable to access an SMTP, or DNS server. The machine sends an e-mail noti-
fying the error.
Contact the administrator.
*Cannot Obtain IP*
The machine cannot obtain an IP address from the DNS server. The machine sends an e-mail
notifying the error.
Contact the administrator.
Control Panel Error Messages: General
8
387