Various Print Functions - Ricoh GELSPRINTER GX 3000SF User Manual

Various Print Functions

By using various print functions, you can make prints appropriate for your purposes.
This section briefly describes some of the settings that can be specified.
For details, see the printer driver Help.
Printing Multiple Document Sets
You can print multiple sets of the same document.
Depending on the application, this setting may not be available.
If you do not use the Collate function, prints will be delivered in page batches (P1, P1, P2, P2 ...).
If you use the Collate function, prints will be delivered in document batches (P1, P2, P1, P2 ...).
Collating
You can print complete sets of prints one set at a time when printing multiple sets such as for pres-
entation materials.
Depending on the application, this setting may not be usable.
Even when using the Collate function with Layout, Poster, or Duplex, document boundaries are
correctly recognized so problems like the first page and last page being printed on the same
sheet do not occur.
Collating might not be possible in the following cases:
When copying originals containing complex colors, such as photographs.
When printing on large sheets such as A4, letter, or legal.
When printing on glossy paper.
Printing Web Pages
You can specify the settings for printing Web pages properly.
When a Web page is printed, it may not fit on the paper used or it may not be printed as it looks
on the screen. Use the information below to print Web pages correctly.
Printing low resolution images smoothly
Images displayed on Web sites tend to be low-resolution images to reduce data size. Before
printing, be sure to make the setting to print low-resolution images smoothly.
When a Web page is printed over multiple sheets, images or text where any two sheets are
connected may not be printed.
Printing the background color of a Web page
When printing images, the higher the resolution of images, the longer the time required for
printing.
Fitting a whole Web page to the paper size
If a whole Web page cannot be printed on the paper size used, reduce it using [Fit to paper size]
or [Scale] under the [Reduce/Enlarge] function.
: If [A3 (297 x 420 mm)] or [B4 JIS (257 x 364 mm)] is selected for [Original
size:] and [Reduce automatically to fit A4] is selected, print image is automatically reduced to fit
A4 size paper.
: If [11" x 17"] or [Legal (8 1/2" x 14")] is selected for [Original size:] and
[Reduce automatically to fit Letter] is selected, print image is automatically reduced to fit Letter
size paper.
Various Print Functions
4
191