Table of Contents
Advertisement
Printing is slow and takes time, which delays release of the application.
In the [Print Quality] area, select [Speed priority] or [High speed], and then print.
In the [Printer Configuration] tab, set [Spool format:] to [EMF].
In the [Change User Settings] dialog box, on the [Image Adjustments] tab, under [Image
processing priority], deselect the [Adjust photos and images] and [Smooth low resolution
images] check boxes. See p.189 "Correcting the Hue of Digital Photos".
Close the resident application.
Printing stops halfway.
View the status monitor to check whether an error has occurred.
To print on preprinted or prepunched paper, select the [Use preprinted/prepunched paper]
check box in the [Printer Configuration] tab. See p.389 "Status Monitor Errors".
How can I make the Print mode change automatically according to the status of envelope selector ?
To automatically do single-sided printing when the envelope selector is set to the envelope
position, on the [Printer Configuration] tab, select the [When the envelope selector is set to
Envelope Mode, use uni-directional printing only] check box.
How can I make the Print mode switch automatically according to the envelope selector setting?
To make the machine automatically switch to unidirectional printing when the envelope
selector is set to the envelope position, on the [Printer Configuration] tab, select the [When
the envelope selector is set to Envelope Mode, use uni-directional printing only] check box.
How can I prevent ink transfer between printed sheets during duplex printing?
On the [Printer Configuration] tab, in the [Sheet-dry Print Delay...] dialog box, change [Print
delay time:].
Colors do not match the displayed image
If there are differences between colors of the print results and the displayed image, the following
questions should be addressed.
Has the hue of colors been adjusted?
Since printed colors and screen colors are produced by different methods, a color printed
and a color displayed on a screen can have different hues even though they are the "same"
color. Use the color matching function to make the hue of printed colors and displayed
colors closer. See p.189 "Changing the Color Profiling Pattern".
Has the nozzle check been performed?
The print-heads may be clogged and the amount of ink may not be able to be regulated.
Print the nozzle check test pattern and clean the print-heads as necessary. See p.167 "Noz-
zle Check" and p.168 "Head-cleaning".
Was printing done in black and white?
Check the color setting of the application and the color print setting of the printer driver. See
p.189 "Printing in Black and White".
Troubleshooting When Using the Printer Function
8
369
Advertisement
Table of Contents
Troubleshooting
