Table of Contents
Advertisement
2. Getting Started
4
Click [Quick Install for USB].
5
Read the license agreement, click [I accept the agreement.], and then click [Next >].
6
Check that the power of the machine is off, and then click [Next >].
7
Check again that the power of the machine is off, and then click [Next >].
8
Make sure that the computer and machine are properly connected, and then press the [Power] key.
2
Installation starts.
If the connection to the computer was not confirmed, make the port settings again after installation is
complete.
9
Select whether or not to open the machine status monitor automatically, and then click [Next >].
10
Check the installation result, and then click [Next >].
Install User Guide.
11
Click [Next >].
12
Confirm the location in which you want to install Device Setting Utility, and then click [Next >].
To change the installation location, click [Change...]
13
Confirm the program folder in which you want to install Device Setting Utility, and then click [Next >].
Installation starts.
14
When installation is complete, click [Finish].
15
Click [Finish].
The printer driver, TWAIN driver, LAN-Fax driver, Device Setting Utility and User Guide are now
installed.
After inserting the CD-ROM, the "Drivers, Manual & Utilities" dialog box appears. If it does not,
doubleclick the CD-ROM drive icon under [My Computer] or [Explorer], and then double-click
[Setup.exe].
When installation is complete, User Guide icon appears on your desktop.
If the message prompting you to restart the computer appears, restart the computer.
Confirm the printer driver is correctly installed by checking that the [Power] key of the machine is
lit and performing a test print.
If the message "Digital Signature Not Found" or the [Found New Hardware Wizard] or [Hard-
ware Installation] dialog box appears, see "Notes on the Installation", Quick Installation Guide.
54
Advertisement
Table of Contents
Troubleshooting
