Checking Your Computer Environment - Ricoh GELSPRINTER GX 3000SF User Manual

Checking Your Computer Environment

Check the system requirements for installing the software.
Quick Install for USB
The CD-ROM may not be inserted properly.
The power cord or USB cable may not be properly
connected.
The operating system is incompatible.
There is insufficient hard disk space.
Other applications are not closed.
Windows made USB settings automatically.
The machine is turned on before installation.
Windows NT 4.0 is running.
The USB connection does not work.
Checking Your Computer Environment
Check that the "Drivers, Manual & Utilities"
CD-ROM is inserted properly. Check also that it is not
damaged and the CD-ROM drive is working properly.
Check that the power cord and USB cable are prop-
erly connected and not damaged.
Check that the computer's operating system is fully
compatible with this machine. See "Checking the
Computer and Installation Area", Quick Installation
Guide.
When installing software, quit all other applications.
Installation may be disrupted if other applications
are open. Also, quit any anti-virus applications that
are running.
Open Windows' Device Manager, and then, under
[Universal Serial Bus controllers], remove any con-
flicting devices. Conflicting devices have a yellow [!]
or [?] icon by them. Take care not to accidentally
remove required devices. For details, see p.336
"Deleting Devices".
Switch the machine off and then on, and then try
Quick Install for USB again.
Windows NT 4.0 do not support USB connection
with the machine. Connect the machine via a net-
work in this case.
[Quick Install for USB] is unavailable.
[LAN-Fax Driver for Network] is unavailable.
Configure the machine as a shared network
machine. For details about network printer set-
tings, see "Sharing the Printer".
Switch the machine off, unplug the USB cable from
the machine, launch [Quick Install for USB] again,
and then switch the machine on when the dialog box
confirming software installation appears. If this does
not solve the problem, press the [Menu] key, and
then change [USB Speed] in [Host I/F Settings] from
[Auto] to [Full Speed]. Then, uninstall the software,
delete the device, and launch [Quick Install for USB]
again.
8
329