Ricoh GELSPRINTER GX 3000SF User Manual page 283

5 Specify the destination, and then press the [Yes] key.
O K = Y e s
If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.
6 Press the [ ] key, enter the SUB Code using the number keys.
S u b A d d r . =
O K = Y e s
You can enter the SUB Code using up to 20 digits.
7 Press the [ ] key, and then enter the SID Code using the number keys.
S I D =
You can enter the SID Code using up to 20 digits.
8 Press the [B&W Start] key.
The transmission starts.
You can specify the SUB Code only, not the SID Code. Press the [B&W Start] key after step 6.
You can store SUB Codes or SID Codes as well as names and fax numbers in the Address Book.
p.119 "Address Book"
( T X = S t a r t )
AQR324S
Other Transmission Functions
7
281