Assembling Copy
Copies are assembled as sets in sequential order.
3
2
1
1) Begin using the copier.
For details about procedures and settings in step 1, see p.212 "Sort".
Using This Machine as a Scanner
This section explains basic procedures for using this machine as a scanner.
Scanning Originals Into a Client Computer via TWAIN Driver
Use the following procedure to configure the machine for use as a scanner, so users can scan origi-
nals into a client computer via the TWAIN driver.
1) Use a USB cable to connect the machine to a computer, or connect the machine to the net-
work.
2) Install the TWAIN driver and any other necessary drivers on the computer.
3) If you are using the TWAIN driver via network connection, make the necessary network set-
tings, such as the machine's IP address.
4) Begin using the scanner.
3
3
2
2
1
1
AQR249S
AQR250S
Managing this machine
1
41