Transmission Functions; Automatic Redial; Suspended Transmission - Ricoh GELSPRINTER GX 3000SF User Manual

Transmission Functions

This section explains functions of transmission.

Automatic Redial

If a fax document could not be sent because the line was busy or an error occurred during transmis-
sion, the machine redials.
This function is not available for Internet Fax.
If the machine is still unable to send the fax after redialing the specified number of times, it prints a
[TX Status Report].
In [TX Settings], you can specify that the machine redial up to 10 times in intervals of 2 to 99 min-
utes.
p.143 "Settings to Send Fax"
p.440 "TX Status Report"

Suspended Transmission

If you specify to send a fax while the machine is currently sending another fax, the later fax is sus-
pended and sent after the current transmission is completed.
1 Place or load the original while the machine is sending another fax.
(
- S e t O r i g - F a x O n l y
2 Press the [Fax] key, and make sure the [Memory Trans.] indicator lights.
To send a fax in immediate transmission mode, press the [Memory Trans.] key. Make sure the [Mem-
ory Trans.] indicator is unlit.
) 8 0 %
AQR345S
Transmission Functions
7
273