Settings Required To Send Internet Fax And E-Mail - Ricoh GELSPRINTER GX 3000SF User Manual

Settings Required to Send Internet Fax and E-mail

Settings Required to Send Internet Fax and E-mail
Use [SMTP Settings] to make settings for sending e-mail or Internet faxes.
To use this function with GX 3000SF, the network interface board must be installed.
Sender Name
Specify the sender's name.
Enter a sender name using up to 20 characters.
3
Email Address
Specify the sender's e-mail address.
Enter an e-mail address using up to 64 characters.
SMTP Server Name
Specify the SMTP server name.
Enter [SMTP Server Name] using up to 64 characters. Spaces cannot be entered.
SMTP Port No.
Specify the SMTP Port No.
Enter [SMTP Port No.] between 0 and 65535 using the number keys.
SMTP Svr Timeout
Specify the time to wait for a response from the SMTP server.
The time can be set from 30 to 300 seconds in 1 second increments, using the number keys. The
default setting is 60 second(s).
Insert Fixed Txt
When sending an e-mail, you can include a preset message notifying the recipient that a file is
attached.
Default Subject
You can register text phrases you often.
Enter Default Subject using up to 20 characters.
153