Connecting the Machine to a Private Branch Exchange (PBX)
The following procedure explains how to connect the machine to a private branch exchange (PBX).
When you connect the machine to a PBX, set the PBX system to treat the connection as an ana-
log two-wire circuit. For details, consult your sales or service representative who installed your
PBX.
1
1
PBX System
Raise the connector cover and connect the telephone line to LINE.
Set the reception mode to [Fax Only].
Set the line type to PABX.
p.82 "Setting the Reception Mode"
p.85 "Selecting public switched telephone network (PSTN) or private branch exchange (PABX)"
p.144 "Settings to Receive Fax"
p.308 "Fax Only Mode"
Connecting the Machine to a Telephone Line and Telephone
BBF013S
2
81