Table of Contents
Advertisement
9. Checking the Machine Status
Using Web browser
You can use a Web browser to check the machine's status and change its settings.
To use this function under GX 3000SF, the optional network interface board must be installed.
Available operations
The following operations can be remotely performed using Web Image Monitor from a client
computer.
Displaying machine status or settings
Resetting the machine
Registering the Quick Dial, Speed Dial, Group Dial.
Making Facsimile settings
Making e-mail notification settings
Making network protocol settings
Configuring the machine
To perform the operations from Web Image Monitor, TCP/IP is required. After the machine is con-
figured to use TCP/IP, operations from Web Image Monitor become available.
Recommended Web browser
Internet Explorer 4.0 or higher
Netscape Navigator 4 or higher
If the previous versions of the Web browser above are used or JavaScript and cookies are not
enabled with the Web browser used, display and operation problems may occur.
If you are using a proxy server, change the Web browser settings. Contact your network adminis-
9
trator for information about the settings.
The previous page may not appear even after the back button of a Web browser is clicked. If this
happens, click the refresh button of a Web browser.
Updating the machine information is not automatically performed. Click the refresh button of a
Web browser.
422
Advertisement
Table of Contents
Troubleshooting
