Connecting The Machine To An Adsl Circuit - Ricoh GELSPRINTER GX 3000SF User Manual

2. Getting Started

Connecting the Machine to an ADSL Circuit

The following procedure explains how to connect the machine to an ADSL circuit.
The connection procedure described in this section is only an example, it does not apply to
every type of connection. For product-specific details about connections and settings, see the
2
manuals provided with your ADSL modem (or other ADSL equipment) and splitter.
Do not connect the machine to the telephone line in parallel with any other device. Terminat-
ing the line with more than one device in this can result in degraded fax images, errors when
sending or receiving fax images, and other communication problems.
1
1 Splitter
2 ADSL equipment
Connect the telephone line to LINE and the external telephone to TEL.
Set the line type to PSTN.
Some ADSL devices have a built-in splitter so do not require the use of a separate splitter.
p.82 "Setting the Reception Mode"
p.83 "Selecting the Line Type"
p.144 "Settings to Receive Fax"
p.308 "Fax Only Mode"
p.309 "Manual RX Mode"
p.310 "Auto SW Mode"
80
2
BBF012S