Using Internet Fax - Ricoh GELSPRINTER GX 3000SF User Manual

1. Read This First

Using Internet fax

Use the following procedure to configure the machine for use as an Internet fax.
1
To use this function with GX 3000SF, the network interface board must be installed.
1) Connect the machine to the network.
2) Specify the network settings, such as the machine's IP address and the gateway address.
3) Specify the SMTP settings, such as the sender name, SMTP server and the SMTP port number.
4) Specify the POP3 settings, such as the POP3 server and the POP3 port number.
5) Begin using the facsimile.
For details about procedures and settings in step 1, see "Installing the Printer Driver (Network
Interface Board)", Quick Installation Guide.
For details about procedures and settings in step 2, see p.150 "Network Settings".
For details about procedures and settings in step 3, see p.153 "Settings Required to Send Internet
Fax and E-mail".
For details about procedures and settings in step 4, see p.155 "Settings Required to Receive Inter-
net Fax and E-mail".
For details about procedures and settings in step 5, see p.119 "Registering Addresses", p.318
"Internet Fax Functions".
46
AQR255S