Using The Facsimile With An External Telephone - Ricoh GELSPRINTER GX 3000SF User Manual

Using the facsimile with an external telephone

Use the following procedure to configure the machine for use as a facsimile with an external tele-
phone.
1) Connect the machine to the telephone line.
2) Connect this machine to a telephone.
3) Make settings for line type.
4) Make settings for transmission.
5) Make settings for reception, such as the reception mode.
6) Register the destinations to Address Book if necessary.
7) Begin using the facsimile with the external telephone.
In step 3, the fax number and the date and time of transmission must be included
in the header of all pages faxed to, from, or within the United States.
For details about procedures and settings in step 1, see p.78 "Connecting a Telephone Line".
For details about procedures and settings in step 2, see p.79 "Connecting a Telephone".
For details about procedures and settings in step 3, see p.83 "Selecting the Line Type", p.147
"Specifying the Line Type".
For details about procedures and settings in step 4, see p.143 "Settings to Send Fax", p.149 "Reg-
istering Fax Information".
For details about procedures and settings in step 5, see p.144 "Settings to Receive Fax".
For details about procedures and settings in step 6, see p.119 "Registering Addresses".
For details about procedures and settings in step 7, see p.263 "Before Sending a Fax", p.304
"Before Receiving a Fax".
AQR254S
Managing this machine
1
45