Recording Using A Usb Flash Drive - Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone

Recording Using a USB Flash Drive

You can attach a USB flash drive to your IP phone when the phone is idle or during an active call.
This feature is not available by default. For more information, contact your system administrator.
When the phone is idle, and you insert a USB flash drive into the USB port on your phone, the
phone will detect the USB flash drive and display a flashing icon
flash drive, the icon stops flashing and LCD screen prompts "USB device has been connected
successfully!".
When there is an active call, and you insert a USB flash drive into the USB port on your phone,
the LCD screen will prompt "USB device has been connected successfully! Available Recording
Time: XX:XX:XX". For more information on the available recording time, refer to
Storage Space on page 175.
The following figure shows an example:
The Start REC soft key controls the recording function, and is available:
The free space of USB flash drive is sufficient

When there are one or more calls connected to your IP phone

During an active call

When calls are on hold or muted

During an attended transfer

During a conference call

170
. After detecting the USB
Viewing the