Yealink SIP-T29G User Manual page 175

Click Confirm to accept the change.
4.
Note
Visual and audio alert features are configurable via web user interface only.
When the monitored line receives an incoming call, the following occurs on your phone:
The phone plays a specific ring tone (if enabled).

The BLF key LED flashes red.

The caller ID appears on the LCD screen (if enabled).

In the following figure, the LCD screen shows an incoming call from 1008 on the monitored line.
You can do the following actions:
- Press the DPickup soft key to pick up the call.
- Press the Send soft key to dial out the monitored phone number.
- Press the New Call soft key to place a new call.
- Press the Cancel soft key to exit the screen.
Note
If your phone is locked and the type of the phone lock is configured as Function Keys or All
Keys, you cannot use the DPickup, Send, New Call and Cancel soft keys until unlocked. For
more information, refer to
Configuring Directed Call Pickup Code
If you configure the directed call pickup code in advanced, you can pick up the monitored user's
incoming call by pressing the BLF key. You can configure the directed call pickup code when
configuring a BLF key. For more information, refer to
can also configure the directed call pickup code on a global or per-line basis via web user
interface.
Phone Lock on page 54.
Advanced Phone Features
Configuring a BLF Key on page 161. You
163