Yealink SIP-T29G User Manual page 164

User Guide for the SIP-T29G IP Phone
Press
If the call park code is configured, the phone will dial the configured call park code
-
shown as below:
Do one of the following:
2.
If you want to park the call against the local extension.
a)
Press
1)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
If you want to park the call against desired extension.
b)
Enter an extension (e.g., 4606) where you want to park the call.
1)
Press
2)
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
Do one of the following:
1.
If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
-
If the park retrieve code is configured, press the Retrieve soft key on the dialing
-
screen or retrieve key (if configured) on the IP phone.
The phone will dial the configured park retrieve code and the Retrieve screen appears
as below:
152
, or the Park soft key.
.
or .