Yealink SIP-T29G User Manual page 214

User Guide for the SIP-T29G IP Phone
Press
The incoming call is answered and the original call is placed on hold. The LED indicators of
the line key 1 on phone A will slowly flash green and phone B will slowly flash red indicating
that there is the held call on the line key 1. The LED indicators of the line key 2 on phone A
will illuminate solid green and phone B will illuminate solid red indicating that there is an
active call on the line key 2.
You can also answer the call on phone B. Do one of the following on phone B:
Press the line key 2. Phone A stops ringing.
-
- Press
The LED indicators of the line key 2 on phone A will illuminate solid red and phone B will
illuminate solid green indicating that there is an active call on the line key 2. Meanwhile,
The LED indicators of the line key 1 phone A will illuminate solid green and phone B will
illuminate solid red indicating that there is an active call on the line key 1.
Note If the number of incoming calls is greater than the configured line keys, the line keys will be used
by sequence circulation.
Placing a Call on Hold
To place a call on public hold:
Press
1.
The line key LEDs on phone A slowly flash green and phone B slowly flash red when the
shared line call is placed on hold.
202
or the Answer soft key. Phone B stops ringing.
or the Answer soft key. Phone A stops ringing.
or the Hold soft key on phone A when party A and party C are talking.