Connecting To The Wireless Network - Yealink SIP-T29G User Manual

The IP phone scans the available wireless networks in your area.
When
Wi-Fi USB dongle WF40 is connected to the USB port at the back of the IP phone, the
screen will prompt "
now?". You can Press the OK soft key to activate
automatically.

Connecting to the Wireless Network

Three ways to connect IP phone to the wireless network:
Manually connect to an available wireless network

Wi-Fi Protected Setup (WPS)

Manually add a wireless network

Manually Connect to an Available Wireless Network
To manually connect to a wireless network via phone user interface:
Press Menu->Basic->Wi-Fi.
1.
Press
2.
available networks), and then press the Enter soft key.
If there is no available wireless network, press the Scan soft key to search for the wireless
network again.
Wi-Fi
adapter has been added, scanning the
or to highlight X available networks (X represents the number of
available wireless network
Wi-Fi
mode directly and scan
Getting Started
LCD
right
Wi-Fi
devices
29