Transfer Mode - Yealink SIP-T29G User Manual

Follow the voice prompt, do one of the following:
2.
Press
-
Enter the desired extension followed by # (e.g., 4606#) on any phone.
-

Transfer Mode

To configure call park feature in transfer mode via web user interface:
Click on Features->Call Pickup.
1.
Select Transfer from the pull-down list of Call Park Mode.
2.
Select Enabled from the pull-down list of Call Park.
3.
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and
the Retrieve soft key will display on the dialing screen.
(Optional.) Enter the call park code in the Call Park Code field.
4.
It is configured for the Park soft key. This call park code will also apply to the call park key.
(Optional.) Enter the park retrieve code in the Park Retrieve Code field.
5.
It is configured for the Retrieve soft key. This park retrieve code will also apply to the
retrieve key.
Click Confirm to accept the change.
6.
If the Park or Retrieve soft key doesn't appear on the LCD screen, please select Disabled from
Note
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey
Layout.
To park a call in Transfer mode:
During a call, press the Park soft key (You may need to press the More soft key to see the
1.
Park soft key) or the call park key (if configured).
on the phone where the call is parked.
Basic Call Features
153