Call Waiting - Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
Press the Directory soft key, and then select Local Directory. Select the desired group
-
and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
Press the Directory soft key, and then select History. Select the desired list and then
-
press
to Directory
Press
Press the Directory soft key, and then select Remote Phone Book. Select the desired
-
group and search for the contact (Directory should be configured in advance. Refer to
Directory
Press
After the party answers the call, press
3.
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.

Call Waiting

You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive
another call while there is already an active call on the phone. Otherwise, another incoming call
is automatically rejected by the phone with a busy message when there is an active call on the
phone. You can also enable or disable the phone to play a warning tone when receiving another
call.
To configure call waiting via phone user interface:
Press Menu->Features->Call Waiting.
1.
Press
2.
Press
3.
(Optional.) Enter the call waiting on code or off code respectively in the On Code or Off
4.
Code field.
146
on page 62 for more information).
, or the Send soft key to complete the transfer.
or to select the entry (Directory should be configured in advance. Refer
on page 62 for more information).
, or the Send soft key to complete the transfer.
on page 62 and Remote Phone Book
, or the Send soft key to complete the transfer.
or , or the Switch soft key to select Enabled from the Call Waiting field.
or , or the Switch soft key to select Enabled from the Play Tone field.
on page 78 for more information).
or the Transfer soft key to complete the