Yealink SIP-T29G User Manual page 102

User Guide for the SIP-T29G IP Phone
The default device name is "Yealink T29G".
Press the Save soft key to accept the change or the Back soft key to cancel.
3.
The preconfigured Bluetooth device name will display in scanning list of other device.
Disconnecting the Bluetooth Headset
You can disconnect the Bluetooth headset from your phone. After you disconnect the Bluetooth
headset, it will still remain paired and be displayed in the Paired Bluetooth Device list. So you
can easily connect it to your IP phone again.
To disconnect your Bluetooth headset from your phone:
Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
1.
Select the connected Bluetooth headset.
2.
Press the Disconnect soft key.
3.
The Bluetooth headset is disconnected. To connect it to your IP phone again, press the
Connect soft key.
Deleting the Paired Bluetooth Headset
You can delete your Bluetooth headset from your phone. When you delete the Bluetooth
headset, it disappears from the Paired Bluetooth Device list. To connect it to your IP phone
again, you need to scan and connect it again.
To delete your Bluetooth headset from your phone:
Press Menu->Basic->Bluetooth->Paired Bluetooth Device.
1.
Select the Bluetooth headset you want to delete.
2.
Press the Option soft key, and then select Delete from the prompt list.
3.
The LCD screen prompts the following warning "Delete selected item?".
Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
4.
You can also delete all headsets by pressing the Option soft key and then select Delete All. For
Note
more information, refer to the above steps.
If you cannot connect a Bluetooth headset to the phone successfully, we recommend that you
delete the Bluetooth headset from the Paired Bluetooth Device list (if it exists) before pairing it.
90