Yealink SIP-T29G User Manual page 43

The Wi-Fi icon
For more information on the password of the
Note
administrator.
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks. WPS can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to press WPS key on both the IP

phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly

by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
To connect to the wireless network using PBC method:
Press Menu->Basic->Wi-Fi.
1.
Press the WPS soft key, and then select WPS from the prompt list.
2.
The LCD screen prompts "WPS has opened, please connect in 120s.".
Long press the WPS key on your gateway/router.
3.
Once WPS setup has completed successfully, the icon
wireless network.
Personal Identification Number (PIN)
To connect to the wireless network using PIN method:
Press Menu->Basic->Wi-Fi.
1.
Press the WPS soft key, and then select WPS-PIN from the prompt list.
2.
The LCD screen prompts "Please input below PIN code on your Wi-Fi router and press OK
to start connecting: xxx".
appears on the status bar.
wireless network
Getting Started
, contact your system
appears after the name of
31