Yealink SIP-T29G User Manual page 148

User Guide for the SIP-T29G IP Phone
Click Confirm to accept the change.
3.
Note Call forward mode is configurable via web user interface only.
To enable call forward in phone mode:
Press Menu->Features->Call Forward.
1.
Press
2.
Depending on your selection:
3.
If you select Always Forward:
a)
Press
1)
Forward field.
Enter the destination number you want to forward all incoming calls to in the
2)
Forward to field.
(Optional.) Enter the always forward on code or off code respectively in the On
3)
Code or Off Code field.
If you select Busy Forward:
b)
Press
1)
Forward field.
Enter the destination number you want to forward incoming calls to when the
2)
phone is busy in the Forward to field.
(Optional.) Enter the busy forward on code or off code respectively in the On
3)
Code or Off Code field.
136
or to select the desired forwarding type, and then press the Enter soft key.
or , or the Switch soft key to select Enabled from the Always
or , or the Switch soft key to select Enabled from the Busy