Conference; Local Conference - Yealink SIP-T29G User Manual

If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. It is
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Call waiting is configurable via web user interface at the path Features->General Information.
Note If on code or off code is not configured, the call waiting may not take effect. It depends on your
server. Contact your server administrator for more information.

Conference

You can create a conference with other two parties using the phone's local conference. You can
create a conference between an active call and a call on hold (on the same or another line) by
pressing or the Conference soft key. The SIP-T29G also supports network conference.
Note
Network conference is not available on all servers. For more information, contact your system
administrator.

Local Conference

The SIP-T29G IP phone supports up to 3 parties (including yourself) in a conference call. This is
the default method of conference called Local Conference.
To set up a local conference call, make sure local conference feature is enabled. For more
Note
information, contact your system
To set up a local conference call:
Place a call to the first party.
1.
When the first party answers the call, press
2.
call.
The active call is placed on hold.
not available on all servers.
.
administrator
or the Conference soft key to place a new
Basic Call Features
147