Auto Redial - Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
The icon
Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer is only applicable when there is no other call in progress on the phone.

Auto Redial

You can enable auto redial to automatically redial a phone number when the called party is busy.
You can also configure the number of auto redial attempts and the time to wait between redial
attempts.
To configure auto redial via phone user interface:
Press Menu->Features->Others->Auto Redial.
1.
Press
2.
Enter the desired time (in seconds) in the Redial Interval field.
3.
The default value is "10".
Enter the desired number of redial attempts in the Redial Times field.
4.
The default value is "10".
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Auto redial is configurable via web user interface at the path Features->General Information.
124
appears on the LCD screen.
or , or the Switch soft key to select Enabled from the Auto Redial field.