Yealink SIP-T29G User Manual page 149

If you select No Answer Forward:
c)
Press
1)
Forward field.
Enter the destination number you want to forward unanswered incoming calls to
2)
in the Forward to field.
Press
3)
forwarding from the After Ring Time field.
The default ring time is 12 seconds.
(Optional.) Enter the no answer forward on code or off code respectively in the
4)
On Code or Off Code field.
Press the Save soft key to accept the change or the Back soft key to cancel.
4.
The icon on the status bar indicates that the call forward is enabled.
To enable call forward in custom mode:
Press Menu->Features->Call Forward.
1.
Press or to select the desired account, and then press the Enter soft key.
2.
Press or to select the desired forwarding type, and then press the Enter soft key.
3.
Depending on your selection:
4.
If you select Always Forward, you can enable it for a specific account.
a)
Press
1)
Forward field.
Enter the destination number you want to forward all incoming calls to in the
2)
or , or the Switch soft key to select Enabled from the No Answer
or , or the Switch soft key to select the ring time to wait before
or , or the Switch soft key to select Enabled from the Always
Basic Call Features
137