Power Saving - Yealink SIP-T29G User Manual

This field is configurable only if you have uploaded a custom picture via web user interface.
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
To configure the screen saver via web user interface
Click on Settings->Preference.
1.
Select the desired wait time from the pull-down list of Screensaver Wait Time.
2.
Select the desired value from the pull-down list of ScreenSaver Display Clock.
3.
Select the desired screen saver type from the pull-down list of Screensaver Type.
4.
- If you select System.
The IP phone will automatically set the built-in picture as the screen saver.
- If you select Custom.
The IP phone will automatically set the custom pictures you upload as the screen saver,
and display these pictures alternately.
Click Confirm to accept the change.
5.

Power Saving

The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
Customizing Your Phone
:
45